Tag Archives: Turbosound

Turbosound Turbosound Iq15b 15 Inch IQ15B

Turbosound Turbosound Iq15b 15 Inch Powered SubTurbosound Turbosound Iq15b 15 Inch Powered Sub
The iQ15B is a front loaded 15 powered subwoofer suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The high excursion 15 low frequency driver with double suspension low mass 4 voice coil provides fast and accurate transient response for virtually distortion-free operation even in the most demanding environments.Equipped with an efficient, lightweight KLARK TEKNIK Class-D power amplifier, the iQ15B provides 3000 watts of peak output power. Detailed control of the systems performance is managed by a sophisticated but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for punch and definition at high output levels as well as long-term reliability. The iQ15Bs advanced DSP speaker modeling presets include detailed and accurate models of some of the audio industrys most-respected speaker systems.On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, Channel A/B gain control, and a single rotary encoder for intuitive access to level, EQ, Speaker modeling, and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs and balanced XLR outputs for powered satellite loudspeakers, the iQ15B features a mic/line switch and level control with signal present LED.The iQ15B also features Turbosounds proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk, but also significantly reduces setup or installation time. An onboard USB port provides access for remote control of the iQ15B via PC, as well as DSP and speaker modeling firmware updates.The birch plywood e
Pro Audio, Live Sound, Stage Subwoofers, Powered Stage Subwoofers Turbosound J30614 IQ15B
Turbosound, Powered Stage Subwoofers

Used Turbosound Turbosound Iq15b 15 USED005004 IQ15B

Used Turbosound Turbosound Iq15b 15 Inch Powered Sub  888365915364Used Turbosound Turbosound Iq15b 15 Inch Powered Sub 888365915364
The iQ15B is a front loaded 15 powered subwoofer suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The high excursion 15 low frequency driver with double suspension low mass 4 voice coil provides fast and accurate transient response for virtually distortion-free operation even in the most demanding environments.Equipped with an efficient, lightweight KLARK TEKNIK Class-D power amplifier, the iQ15B provides 3000 watts of peak output power. Detailed control of the systems performance is managed by a sophisticated but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for punch and definition at high output levels as well as long-term reliability. The iQ15Bs advanced DSP speaker modeling presets include detailed and accurate models of some of the audio industrys most-respected speaker systems.On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, Channel A/B gain control, and a single rotary encoder for intuitive access to level, EQ, Speaker modeling, and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs and balanced XLR outputs for powered satellite loudspeakers, the iQ15B features a mic/line switch and level control with signal present LED.The iQ15B also features Turbosounds proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk, but also significantly reduces setup or installation time. An onboard USB port provides access for remote control of the iQ15B via PC, as well as DSP and speaker modeling firmware updates.The birch plywood enclosure is finished in a rugged semi-matte black paint and fitted with a rugged powder coated perforated steel mesh grille, 35 mm pole mount to support a satellite speaker, and plated steel castors with rubber tires. Mains power input and link output is provided via Neutrik powerCON* connectors.
Pro Audio, Live Sound, Stage Subwoofers, Powered Stage Subwoofers Turbosound J30614M.004 USED005004 IQ15B
Turbosound, Powered Stage Subwoofers

Turbosound Iq12 12 Inch Powered IQ12

Turbosound Iq12 12 Inch Powered LoudspeakerTurbosound Iq12 12 Inch Powered Loudspeaker
The iQ12 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes a 12 low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1 compression driver with copper-clad aluminum voice coil for extended high frequency reproduction. Equipped with an efficient and lightweight two-channel KLARK TEKNIK Class-D power amplifier, the iQ12 provides an impressive 2500 Watts of peak output power. A high degree of control over the loudspeaker systems performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels as well as for long-term reliability. The iQ12s advanced DSP speaker modeling presets include accurate models of some of the audio industrys most-respected loudspeakers. KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to optimize the iQ12s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a user interface consisting of an LCD display, Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modeling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ12 features a mic/line switch and level control with signal present LED on each channel. The iQ12 also features Turbosounds propriSpeaker configurationActive/passive:ActiveType:SubwooferLF driver:12MF driver:N/AHF driver:1PowerAmplifier class:DWattage:2500W peakMixer/preamp:N/AAudioFrequency response:45Hz – 20 kHzCoverage pattern:80 x 60Max SPL:130 dBInputsXLR:2 x XLR/TRSTRS:TS:RCA:Output/thruXLR:2 from input, 1 mixTRS:TS: RCA:SPEAKON: EnclosureCabinet material:PolypropeleneWidth:11Height:18Depth:11Weight:32 lb.
Pro Audio, Live Sound, PA Speakers, Powered PA Speakers Turbosound J24188 IQ12
Turbosound, Powered PA Speakers

Turbosound Siena Tsp122-An 2-Way 12 TSP122AN

Turbosound Siena Tsp122-An 2-Way 12 Powered LoudspeakerTurbosound Siena Tsp122-An 2-Way 12 Powered Loudspeaker
The 2-way full range TSP122-AN is a 2,500 Watt 12 powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the TSP122-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.Custom-Engineered DriversTURBOSOUND is recognized the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilizing only drivers designed specifically for each application its what sets us apart from the competition. The TSP122-AN loudspeaker features a 12 low frequency driver with an inside/outside wound low mass voice coil for improved transient response and an titanium dome 1 high frequency compression driver, which is mounted on a 70Ã?° horizontal by 50Ã?° vertical dispersion low distortion waveguide.Onboard DSPA high degree of control over the loudspeaker systems performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels and long-term reliability.Intuitive User InterfaceOn the rear panel of the amplifier module, the user interfaces LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the TSP122-AN via a free PC cSpeaker configurationActive/passive:ActiveType:SubwooferLF driver:12MF driver:N/AHF driver:N/APowerAmplifier class:DWattage:2500W Peak Mixer/preamp:N/AAudioFrequency response:50Hz – 18kHzCoverage pattern:N/AMax SPL:133 dBInputsXLR:2TRS:N/ATS:N/ARCA:N/AOutput/thruXLR:2TRS:N/ATS:N/ARCA:N/AEnclosureCabinet material:18 mm Birch plywoodWidth:15.1Height:24.1Depth:13.4Weight:61.2 lb.
Pro Audio, Live Sound, PA Speakers, Powered PA Speakers Turbosound J41097 TSP122AN
Turbosound, Powered PA Speakers

Turbosound Siena Tsp152-An 2-Way 15 TSP152AN

Turbosound Siena Tsp152-An 2-Way 15 Powered LoudspeakerTurbosound Siena Tsp152-An 2-Way 15 Powered Loudspeaker
The 2-way full-range TSP152-AN is a 2,500 Watt 15 powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the TSP152-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.Custom-Engineered DriversTURBOSOUND is recognized the world over for designing and building some of the most iconic loudspeakers and subwoofers. Turbosound takes meticulous care and pride in maintaining that reputation by utilizing only drivers designed specifically for each application its what sets us apart from the competition. The TSP152-AN loudspeaker features a 15 low frequency driver with an inside/outside wound low mass voice coil for improved transient response and an titanium dome 1 high frequency compression driver, which is mounted on a 70Ã?° horizontal by 50Ã?° vertical dispersion low distortion waveguide. Class-D Massive Power, Perfect SoundEquipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TSP152-AN provides an impressive 2,500 Watts of output power in a highly portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.Onboard DSPA high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels and long-term reliability.Intuitive User InterfaceOn the rear panelSpeaker configurationActive/passive:ActiveType:Full-rangeLF driver:15MF driver:N/AHF driver:1 Titanium domePowerAmplifier class:DWattage:2500W Mixer/preamp:N/AAudioFrequency response:41Hz – 18kHzCoverage pattern:70 x 50Max SPL:133 dBInputsXLR:1 x XLR/TRS comboTRS:N/ATS:N/ARCA:N/AOutput/thruXLR:1TRS:Not applicableTS:Not applicableRCA:Not applicableEnclosureCabinet material:PolypropeleneWidth:14.5Height:24Depth:14.5Weight:42.8 lb.
Pro Audio, Live Sound, PA Speakers, Powered PA Speakers Turbosound J41122 TSP152AN
Turbosound, Powered PA Speakers

Used Turbosound Siena Tsp152-An 2-Way USED005002 TSP152AN

Used Turbosound Siena Tsp152-An 2-Way 15 Powered Loudspeaker  190839041241Used Turbosound Siena Tsp152-An 2-Way 15 Powered Loudspeaker 190839041241
The 2-way full-range TSP152-AN is a 2,500 Watt 15 powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the TSP152-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.Custom-Engineered DriversTURBOSOUND is recognized the world over for designing and building some of the most iconic loudspeakers and subwoofers. Turbosound takes meticulous care and pride in maintaining that reputation by utilizing only drivers designed specifically for each application its what sets us apart from the competition. The TSP152-AN loudspeaker features a 15 low frequency driver with an inside/outside wound low mass voice coil for improved transient response and an titanium dome 1 high frequency compression driver, which is mounted on a 70Ã?° horizontal by 50Ã?° vertical dispersion low distortion waveguide.Class-D Massive Power, Perfect SoundEquipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TSP152-AN provides an impressive 2,500 Watts of output power in a highly portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.Onboard DSPA high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels and long-term reliability.Intuitive User InterfaceOn the rear panel of the amplifier module, the user interfaces LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the TSP152-AN via a free PC computer software download from turbosound as well as convenient DSP firmware updates.ULTRANET ConnectivityULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Turbosound Inspire Ip15b 15 Powered IP15B

Turbosound Inspire Ip15b 15 Powered SubwooferTurbosound Inspire Ip15b 15 Powered Subwoofer
The 1,000-Watt INSPIRE iP15B powered subwoofer produces high levels of low-end punch, with the definition and clarity typically reserved for much larger systems. Equipped with a dedicated 600- Watt Class-D amplifier for the 15 long-excursion Low-Frequency (LF) driver, and 2 x 200-Watt amps for your passive satellite speakers, the iP15B is ideally-suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs, and much more. Lightweight (26.3 kg / 58.0 lbs) and easy to transport, the iP15B also features a two-channel digital mixer with industry-leading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifier and Spatial Sound technologies plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control. Tiny Subwoofer Tremendous SoundDesigned for maximum portability and low-end support, the iP15B can be used as a standalone subwoofer with your powered full range speakers, or the backbone of a great-sounding speaker system. Setup is fast and easy; just connect your mic or mixer feed, your passive loudspeakers, and power. The iP15B instantly fills the room with the world-famous TURBOSOUND sound that has won the coveted Queens Award an unprecedented three times.KLARK TEKNIK Inspired TechnologyKLARK TEKNIK is recognized worldwide as one of the most prestigious British audio companies, with a 40-year pedigree and even a TEC Lifetime Achievement Award to back it up. The Company has designed and manufactured products for world-class artists, and their legendary DN780 reverb processor is considered by leading audio engineers around the world as the industry standard. Check out their website to learn more about KLARK TEKNIKs legendary heritage.DSP the Secret to Superb SoundFrom the instant your signal enters the iP15B, the built-in KLARK TEKNIK DSP (Digital Signal Processor) takes over, ensuring the highest pSpeaker configurationActive/passive:ActiveType:SubwooferLF driver:15MF driver:N/AHF driver:N/APowerAmplifier class:DWattage:600W, 2 x 200W (satellites)Mixer/preamp:N/AAudioFrequency response:45hZ – 150Hz +3dBCoverage pattern:N/AMax SPL:120 dB peakInputsXLR:2 XLR/TRS comboTRS:N/ATS:N/ARCA:N/AOutput/thruXLR:2TRS:N/ATS:N/ASpeakON:2EnclosureCabinet material:15 mm birch plyWidth:18.1Height:224.Depth:21.5Weight:58 lb.
Pro Audio, Live Sound, Stage Subwoofers, Powered Stage Subwoofers Turbosound J41202 IP15B
Turbosound, Powered Stage Subwoofers

Turbosound Iq18b 18 Inch Powered IQ18B

Turbosound Iq18b 18 Inch Powered SubTurbosound Iq18b 18 Inch Powered Sub
Respected among both touring concert professionals and live music fans for their superb, high-grade sound systems, Turbosound pours its decades of experience into this powerhouse of a subwoofer. The deep, thumping heartbeat of the iQ18B is its efficient KLARK TEKNIK Class D amplifier, pounding out an incredible 3000W of ground-shaking power. Its perfect for both mobile applications and permanent installations with heavy low-end demands. Built tough for the rigors of the road, the iQ18Bs 18 in. driver is enclosed in a rugged birch cabinet for clean, tight sound and long-lasting durability. The enclosure is finished in a hard-wearing, semi-matte black paint and fitted with a tough, powder-coated, perforated steel mesh grille, 35 mm pole mount to support a satellite speaker, and plated steel casters with rubber tires. Mains power input and link output is provided via Neutrik powerCON connectors.  The high-excursion, 18 in. driver with a double-suspension, low-mass 4 in. voice coil provides fast and accurate transient response for virtually distortion-free operation, even during the most demanding performances.  The iQ18Bs KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels, as well as long-term reliability.  Turbosounds proprietary ULTRANET technology allows the use of CAT5 cables for transmitting pristine, multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers. This digital distribution networking not only eliminates the potential for RFI and crosstalk but also significantly reduces the setup or installation time. An onboard USB port provides access for remote control of the iQ18B via PC, as well as DSP and speaker modeling firmware updates.Speaker configurationActive/passive:ActiveType:SubwooferLF driver:18MF driver:N/AHF driver:N/APowerAmplifier class:DWattage:3000W peakMixer/preamp:N/AAudioFrequency response:40Hz – 130HzCoverage pattern:N/AMax SPL:130 dBInputsXLR:2 x XLR/TRSTRS:TS:RCA:Output/thruXLR:2 from input, 1 mixTRS:TS: RCA:SPEAKON: EnclosureCabinet material:BirchWidth:21Height:27.2Depth:22Weight:87.5 lb.
Pro Audio, Live Sound, Stage Subwoofers, Powered Stage Subwoofers Turbosound J24189 IQ18B
Turbosound, Powered Stage Subwoofers

Turbosound Iq15 15 Inch Powered IQ15

Turbosound Iq15 15 Inch Powered LoudspeakerTurbosound Iq15 15 Inch Powered Loudspeaker
The iQ15 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes a 15 low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1 compression driver with copper-clad aluminum voice coil for extended high frequency reproduction. Equipped with an efficient and lightweight two-channel KLARK TEKNIK Class-D power amplifier, the iQ15 provides an impressive 2500 Watts of peak output power. A high degree of control over the loudspeaker systems performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels as well as for long-term reliability. The iQ15s advanced DSP speaker modeling presets include accurate models of some of the audio industrys most-respected loudspeakers. KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to optimize the iQ15s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a user interface consisting of an LCD display, Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modeling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ15 features a mic/line switch and level control with signal present LED on each channel. The iQ15 also features Turbosounds propriSpeaker configurationActive/passive:ActiveType:SubwooferLF driver:15MF driver:N/AHF driver:1PowerAmplifier class:DWattage:2500W peakMixer/preamp:N/AAudioFrequency response:42Hz – 20 kHzCoverage pattern:75 x 55Max SPL:132 dBInputsXLR:2 x XLR/TRSTRS:TS:RCA:Output/thruXLR:2 from input, 1 mixTRS:TS: RCA:SPEAKON: EnclosureCabinet material:PolypropeleneWidth:17.7Height:28Depth:15Weight:57 lb.
Pro Audio, Live Sound, PA Speakers, Powered PA Speakers Turbosound J24190 IQ15
Turbosound, Powered PA Speakers