The IRT30-112 features the same channel and tube compliment as the bigger Ironheart models and growls with 30W RMS of monster clean, rhythm and lead tones.It features a fully balanced and selectable (dry guitar/amped) DI. It takes its source after the output section – with cabinet emulation. This means you get your whole tone at the DI, a feature only previously available on super-high-end, custom-built guitar rigs.Footswitch included.Power: 30W (tube)Attenuation down to <1WTubes: four 12AX7 (preamp); two 6L6 (power amp)Three channelsSpeaker: 1×12 HH custom designControls: 3-band EQ, push-pull EQ shift, presence, volume, pre-boost, gain, dynamics, tone, reverbBuilt-in digital reverbFX loopImpedance: 8 ohmFootswitch included Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Combo Guitar Amplifiers, Tube Combo Guitar Amplifiers Laney J06800M.016 USED005016 IRT30-112 Laney, Tube Combo Guitar Amplifiers |
Tag Archives: Laney
Laney Lionheart 5W Tube Guitar Combo L5T-112
The Laney Lionheart L5T-112 amp provides the evocative, classic tones of hot tubes pushed hard, but at a volume level your neighbors can live with! Featuring the purest of designs: single-ended Class A output achieved with a single EL84, driven from 3x 12AX7 preamp tubes. The L5T-112 combo amplifier also features gold-plated PCB’s and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the L5T-112 amp comes fitted with the renowned Type 4 large spring line reverb for classic guitar reverb sound. Each L5T-112 Lionheart features a hand stamped build number in the order they come off the Laney production line, and a custom made Lionheart dust cover.The Lionheart combo amp represents everything learned through 40 years of Laney tube heritage, distilled into a single amplifier range. Designed to deliver the ultimate tone of a tube being pushed hard – warm and expressive, at an output level that can be used in everyday environments.Power RMS: 5 WattsInputs: 2x Jack, Hi & LoChannels: Clean & DriveEqualisation: Passive Bass, Middle and TrebleBright Switch: YesPreamp Valves: 3x 12ax7Output Valves: 1x EL84Class: Class AReverb: YesFootswitch: FS2 (Included)Speaker connections: 2x JacksFX Loop(s): YesImpedance: 4, 8 and 16 ohmDrivers: 1x 12 Celestion Heritage G12HBaffle: Marine Grade PlywoodCabinet Design: Marine Grade Plywood cabinet with retro banding strip, leather strap handle and folding tilt back mechanismCountry of origin: China Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Combo Guitar Amplifiers, Tube Combo Guitar Amplifiers Laney 481316.004 L5T-112 Laney, Tube Combo Guitar Amplifiers |
Price Info: Laney Lionheart 5W Tube Guitar Combo L5T-112
Laney Irt60h 60W Tube Guitar Amp Head IRT60H
The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone. One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.Footswitchable Pre BoostThree channels: Clean, Rhythm and LeadClass ABBass, Middle and Treble with push-pull EQ shift on each channelFSR-IRT standard footswitchVariable FX loopMaster PresenceLaney designed digital reverbTwo speaker connectionsTwo 6L6 tubesFour ECC83 tubes60W Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Guitar Amplifier Heads, Tube Guitar Amplifier Heads Laney J00132.001 IRT60H Laney, Tube Guitar Amplifier Heads |
Price Info: Laney Irt60h 60W Tube Guitar Amp Head IRT60H
Used Laney Irt120h 120W Tube Guitar Amp USED005009 IRT120H
The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone. One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.Footswitchable Pre BoostThree channels: Clean, Rhythm and LeadClass ABBass, Middle and Treble with push-pull EQ shift on each channelFSR-IRT standard footswitchVariable FX loopMaster PresenceLaney designed digital reverbTwo speaker connectionsTwo 6L6 tubesFour ECC83 tubes120W Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Guitar Amplifier Heads, Tube Guitar Amplifier Heads Laney J00138M.001.009 USED005009 IRT120H Laney, Tube Guitar Amplifier Heads |
Used Laney Irt120h 120W Tube Guitar Amp USED005008 IRT120H
The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone. One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.Footswitchable Pre BoostThree channels: Clean, Rhythm and LeadClass ABBass, Middle and Treble with push-pull EQ shift on each channelFSR-IRT standard footswitchVariable FX loopMaster PresenceLaney designed digital reverbTwo speaker connectionsTwo 6L6 tubesFour ECC83 tubes120W Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Guitar Amplifier Heads, Tube Guitar Amplifier Heads Laney J00138M.001.008 USED005008 IRT120H Laney, Tube Guitar Amplifier Heads |
Laney Irt120h 120W Tube Guitar Amp Head IRT120H
The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone. One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.Footswitchable Pre BoostThree channels: Clean, Rhythm and LeadClass ABBass, Middle and Treble with push-pull EQ shift on each channelFSR-IRT standard footswitchVariable FX loopMaster PresenceLaney designed digital reverbTwo speaker connectionsTwo 6L6 tubesFour ECC83 tubes120W Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Guitar Amplifier Heads, Tube Guitar Amplifier Heads Laney J00138.001 IRT120H Laney, Tube Guitar Amplifier Heads |
Price Info: Laney Irt120h 120W Tube Guitar Amp Head IRT120H
Laney Ironheart Irt-Studio Rack Tube IRT-Studio
Featuring the same great Ironheart tones as the bigger heads but in a low-wattage studio package with some neat features added.It would be nice to record in a situation where making a lot of noise was not an problem, but in most cases people are recording in home studios, and making a lot of noise is not always an option. So the Ironheart IRT-Studio has a couple of features designed specifically to allow you to get a great tone whether you are recording in the studio or recording live.The IRT-Studio features a USB Audio I/O and a RE-AMP send jack. The USB supplies both a dry signal and the processed signal – split left and right to your DAW – directly into either your PC/Mac or iPad, which means that you can alter the guitar tone of your original recording – without having to re-track anything!The IRT-Studio has an internal dummy load, so, unlike a conventional tube-loaded amp, you don’t need to connect an external speaker – which gives you truly silent recording!It also houses a high-quality speaker-emulated record out immediately after the output section, which means it delivers all-tube tone to your DAW or PA or both at the same time for recording your live shows.Power: 15W (tube)Tubes: three 12AX7 (preamp); two EL84 (power amp)Three footswitchable channelsTwo inputs: 15W and <1WControls: 3-band EQ, push-pull EQ shift, presence, pre-boost, volume, gainBuilt-in reverbFX loopSpeaker-emulated line outInternal dummy load for silent recordingAux. inputXLR line outUSB connectivity for direct recordingGig bag includedRack wings includedFootswitch includedDimensions: 3.46 x 16.8 x 11.22Weight: 12.1 lb. Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Guitar Amplifier Heads, Tube Guitar Amplifier Heads Laney J06801 IRT-Studio Laney, Tube Guitar Amplifier Heads |
Price Info: Laney Ironheart Irt-Studio Rack Tube IRT-Studio
Laney Ironheart All Tube 15W Guitar IRT15H
Housing a single high gain Ironheart channel – with full EQ and switchable pre-boost feature the IRT15H is designed to give you crushing Ironheart tones at low output levels, making it ideal for home recording and your smaller gigs.Using the unique input options of 15W or <1W you can decide just how much volume you want. Plug into the 15W input and get 15 watts RMS – if you want less output but don’t want to lose your tone – no problem, simply plug into the <1W options and get exactly that – your great tone at less than 1 Watt output.The IRT15H also features the cool flexibility of being able to record both silently, for late night recording sessions or in live situations via the SPEAKER EMULATED RECORD OUT feature on the rear panel.Power: 15W (tube)Tubes: three 12AX7 (preamp); two EL84 (power amp)Two inputs: 15W and <1WSingle channelControls: 3-band EQ, presence, boost switch, reverbBuilt-in digital reverbFX loopImpedance: 8, 16 ohmSpeaker-emulated line outAux. in.Gig bag includedDimensions: 6 x 16.7 x 9.25Weight: 12.1 lb.Footswitch sold separately Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Guitar Amplifier Heads, Tube Guitar Amplifier Heads Laney J06798 IRT15H Laney, Tube Guitar Amplifier Heads |
Price Info: Laney Ironheart All Tube 15W Guitar IRT15H
Laney Ironheart All-Tube 30W 1X12 IRT30-112
The IRT30-112 features the same channel and tube compliment as the bigger Ironheart models and growls with 30W RMS of monster clean, rhythm and lead tones.It features a fully balanced and selectable (dry guitar/amped) DI. It takes its source after the output section – with cabinet emulation. This means you get your whole tone at the DI, a feature only previously available on super-high-end, custom-built guitar rigs.Footswitch included.Power: 30W (tube)Attenuation down to <1WTubes: four 12AX7 (preamp); two 6L6 (power amp)Three channelsSpeaker: 1×12 HH custom designControls: 3-band EQ, push-pull EQ shift, presence, volume, pre-boost, gain, dynamics, tone, reverbBuilt-in digital reverbFX loopImpedance: 8 ohmFootswitch included Amplifiers & Effects, Amplifiers, Guitar Amplifiers, Combo Guitar Amplifiers, Tube Combo Guitar Amplifiers Laney J06800 IRT30-112 Laney, Tube Combo Guitar Amplifiers |
Price Info: Laney Ironheart All-Tube 30W 1X12 IRT30-112